Nokia 225 Flashing Solution With CM2 Dongle

Nokia 225 Flashing Solution With CM2 Dongle

Core : v2.25 , MTKx FlashEngine : v10.5

Verify files ... 

MAUI : RM-1011_ROM_eMP_30.06.11

VIVA : RM-1011_VIVA_eMP_30.06.11

LANG : RM-1011_LANG_PACK_ROM_IJ_eMP_30.06.11_001

CUST : RM-1011_CUSTPACK_ROM_IJ_MEA_PK_eMP_30.06.11_001

JMPT : RM-1011_JUMP_TABLE_IJ_MEA_PK_eMP_30.06.11_001

 - > MODE : FullFlash

Dead Mode is Selected

Waiting for USB device...

1. Phone should be Off!

2. Battery must be charged and inserted! ( if not used external power )

 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---

Wait for phone...

Phone found! [ 126 ]

Sync...

Sync Ok, read regs...

Inital regs read done

Boot Info : 

BB_CPU_ID : 6260

BB_CPU_HW : CB00

BB_CPU_SW : 0000

BB_CPU_SB : 8000

BB_CPU_NM : [MediaTek] MT6260_S0001

BB_CPU_SN : EFB2AF64A0E0136436A0C379D1D06478

BROM Protocol Version : 05

BROM Status : 0000

Comm Status : 0000

EXBL Status : Alive [ USB Load Active ]

Switch to BL done

BL Version : 01

Setting...

Setting done , result code 0x8000

Project ID : PEARL.20.10.11.p1

BROM/BL stage done

Seek and prepare DownloadAgent

DownloadAgent matching HW Found!

DA verify and select done

Sending DA to target ...

DA_eMP_Pearl.fg

DA_VERIFY : 00

DA_JUMP   : 00040000

DA_AUTH   : Passed!

DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B

DA_CSTAT  : 0x5A

SOC_VERIFY : 0xC1

BOOT_STYLE : SF_FLASH_BOOT

NOR Flash IC initialized

[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW

[0] : FLASH_DIE : 00EF 0060 0018 0000 

[0] : FLASH_LEN : 0x01000000

FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000

SecureDecrypt : RM-1011_ROM_eMP_30.06.11

SecureDecrypt : RM-1011_VIVA_eMP_30.06.11

SecureDecrypt : RM-1011_LANG_PACK_ROM_IJ_eMP_30.06.11_001

SecureDecrypt : RM-1011_CUSTPACK_ROM_IJ_MEA_PK_eMP_30.06.11_001

SecureDecrypt : RM-1011_JUMP_TABLE_IJ_MEA_PK_eMP_30.06.11_001

OVRLP : 000069B900000001

PHPID : PEARL.20.10.11.p1

OVRLP : 00004DF900000001

DA : FORMAT_BIN

Processing Flash Pre-format

FILES : 5

SAFE_BLOCK : 04

FORMAT_BIN : Ok

WRITE_STYLE : DEF : 0x01 (SEQ)

Write : RM-1011_ROM_eMP_30.06.11

Write : RM-1011_LANG_PACK_ROM_IJ_eMP_30.06.11_001

Write : RM-1011_CUSTPACK_ROM_IJ_MEA_PK_eMP_30.06.11_001

Write : RM-1011_JUMP_TABLE_IJ_MEA_PK_eMP_30.06.11_001

Write : RM-1011_VIVA_eMP_30.06.11

CODE_DNLOAD : Ok

[VERIFY] DONE : RM-1011_ROM_eMP_30.06.11

[VERIFY] DONE : RM-1011_LANG_PACK_ROM_IJ_eMP_30.06.11_001

[VERIFY] DONE : RM-1011_CUSTPACK_ROM_IJ_MEA_PK_eMP_30.06.11_001

[VERIFY] DONE : RM-1011_JUMP_TABLE_IJ_MEA_PK_eMP_30.06.11_001

[VERIFY] DONE : RM-1011_VIVA_eMP_30.06.11

CODE_VERIFY : Ok

Executing FFS FORMAT now...

FAT_RANGE : 0x00C80000-0x00FF3FFF , LEN : 0x00374000

DA_RET   : DA_IN_PROGRESS

DA_RET   : FORMAT_DONE

Rebooting phone now

Flashing done!

Total flash time : 00:02:59

Reboot phone Ok

 - > Hint : If phone shows Battery charge icon -  press and hold PowerOn button 10 seconds

Wait, when phone will be ready ...

Reading Phone Info....

Software Info:     30.06.11 00-00-00 RM-1011

IMEI:  359770062390849

Ape Version: NEMO G 59cb152c/0 (59cb152c+0) T Mon Jul  1 02:50:44 2013 U 69b804d5

PPM version :   IJ

Product code:  059V625

Wait, when phone will be ready ...

Checking...

SimLock status : SimLock is Ok

Security status : Security is Ok

Read Info Done!

Connect phone on selected interface...

Phone found!

MTKx Nokia Phone detected

Read info... Ok

Phone disconected!

Connect phone on selected interface...