Polytron R2407 Read Solution With CM2 Dongle

Polytron R2407 Read Solution With CM2 Dongle

Read,Packed,Write Polytron_R2407...safe

read file

packed file to .pac

write .pac again to devices.... not dead

[/url]

Chinese Miracle II [SPD module] v 1.24

Operation : Format File System / Reset Settings [ v1.24 ]

Settings : SmartFormat is On

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

3. Insert cable

==== Wait for phone...

Device boot not done

Check Drivers

Try again 

Reconnect Power/Cable!

Operation : Format File System / Reset Settings [ v1.24 ]

Settings : SmartFormat is On

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

3. Insert cable

==== Wait for phone...

Phone found! [ 8 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SPRD 773x eMMC loader v3 Infinity

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

FlashMode Set : Ok!

Checking Structure ... 

Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data

Size : 0x00000001671F7000

State : 0x0001

Mount : /cache

Size : 0x0000000009600000

State : 0x0001

Prepare Ok! Format Ok!

Don't touch phone, until it fully bootup to "Welcome Screen"!

Done!

Elapsed: 00:00:22

Reconnect Power/Cable!

Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

3. Insert cable

==== Wait for phone...

Phone found! [ 8 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SPRD 773x eMMC loader v3 Infinity

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

FlashMode Set : Ok!

Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!

- > Wait phone connected ... 

Phone found! [ 8 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SPRD 773x eMMC loader v3 Infinity

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

- > Wait phone connected ... 

Phone found! [ 8 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SPRD 773x eMMC loader v3 Infinity

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

Model Name : P1923

Model Brand : POLYTRON

Model Device: P1923

AndrVersion : 5.1

BaseBand CPU: P1923_GELAITE_HDR

Project Ver : POLYTRON_R2407_V1.0.7_20160408

Model Ext : POLYTRON R2407

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin

[Read Ok] : u-boot.bin

[Read Ok] : prodnv.img

[Read Ok] : sc7731g_CP0_modem.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : nvitem_w.bin

[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin

[Read Ok] : nvitem_wcn.bin

[Read Ok] : logo_480x800.bin

[Read Ok] : fblogo_480x800.bin

[Read Ok] : boot.img

[Read Ok] : system.img

[Build Ok] : cache.img

[Read Ok] : recovery.img

[Build Ok] : userdata.img

AndroidInfo created

Firmware Size : 1633 MiB

Saved to : E:\Firmware Polytron\Polytron R2407\P1923_GELAITE_HDR_P1923_5.1_POLYTRON_R2407_V 1.0.7_20160408_POLYTRON_R2407\

Done!

Elapsed: 00:11:19

Reconnect Power/Cable!

Operation : Convert InfinitySC to SPRD PAC [ v1.24 ]

Target : P1923_GELAITE_HDR_P1923_5.1_POLYTRON_R2407_V1.0.7_ 20160408_POLYTRON_R2407

Step #1 : Identify

MEMORY : eMMC

LAYOUT : eMMC NORMAL

Step #2 : Select logic

Select Logic : SC7731

Step #3 : Processing data

Build PAC

[ADD FILE] : nvitem_w.bin

[ADD FILE] : nvitem_wcn.bin

[ADD FILE] : prodnv.img

[ADD FILE] : u-boot-spl-16k.bin

[ADD FILE] : sc7731g_CP0_modem.bin

[ADD FILE] : DSP_DM_Gx.bin

[ADD FILE] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin

[ADD FILE] : logo_480x800.bin

[ADD FILE] : fblogo_480x800.bin

[ADD FILE] : boot.img

[ADD FILE] : system.img

[ADD FILE] : cache.img

[ADD FILE] : recovery.img

[ADD FILE] : userdata.img

[ADD FILE] : u-boot.bin

Build Ok! Result : 0x0017

Sign PAC ... 

Sign Ok! FW compiled!

Elapsed: 00:02:16

Saved to : P1923_GELAITE_HDR_P1923_5.1_POLYTRON_R2407_V1.0.7_ 20160408_POLYTRON_R2407.pac

Done!

Loading : POLYTRON_R2407_V1.0.7_20160408.pac

CRVersion : BP_R1.0.0

PacCPUinfo : SC77xx

PacVersion : SC7731_eMMC_GELAITE_HDR_P1923_5.1_INFINITY-BOX

FastCheck : 0x00661987BD

Loading files ... 

File : Infinity_fdl1.bin

File : Infinity_fdl2.bin

File : nvitem_w.bin

File : nvitem_wcn.bin

File : prodnv.img

File : u-boot-spl-16k.bin

File : sc7731g_CP0_modem.bin

File : DSP_DM_Gx.bin

File : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin

File : logo_480x800.bin

File : fblogo_480x800.bin

File : boot.img

File : system.img

File : cache.img

File : recovery.img

File : userdata.img

File : u-boot.bin

File : Infinity_SC77xx.xml

Load Ok!

Operation : Flash [ v1.24 ]

======= Flash

Files set for flashing : 

[ MCU ] : POLYTRON_R2407_V1.0.7_20160408.pac

CRVersion : BP_R1.0.0

PacCPUinfo : SC77xx

PacVersion : SC7731_eMMC_GELAITE_HDR_P1923_5.1_INFINITY-BOX

File : Infinity_fdl1.bin

File : Infinity_fdl2.bin

File : nvitem_w.bin

File : nvitem_wcn.bin

File : prodnv.img

File : u-boot-spl-16k.bin

File : sc7731g_CP0_modem.bin

File : DSP_DM_Gx.bin

File : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin

File : logo_480x800.bin

File : fblogo_480x800.bin

File : boot.img

File : system.img

File : cache.img

File : recovery.img

File : userdata.img

File : u-boot.bin

1. Remove battery. Insert battery back

2. Press and hold 'VolumeUp' and 'VolumeDown' keys

3. Insert cable

==== Wait for phone...

Phone found! [ 8 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

PickUp loaders from pac

FDL Ready!

Boot Ver : Spreadtrum Boot Block version 1.1

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

FlashMode Set : Ok!

PMTManager : Load 0x17 records

PMTManager : PMT Update Ok!

Flashing now

[FlashProc] : CODE 

Current ID : PRODNV

Current File : prodnv.img

Flashing now ... 

[FlashProc] : Ok!

[FlashProc] : ERASE 

Current ID : ERASEUBOOT

Current Part : uboot

[FlashProc] : Ok!

[FlashProc] : ERASE 

Current ID : FLASH

Current Part : wruntimenv1

[FlashProc] : Ok!

[FlashProc] : ERASE 

Current ID : FLASH_WCN

Current Part : wcnruntimenv1

[FlashProc] : Ok!

[FlashProc] : ERASE 

Current ID : ERASEMISC

Current Part : misc

[FlashProc] : Ok!

[FlashProc] : BOOTCODE

Current ID : SPLLOADER

Current File : u-boot-spl-16k.bin

Flashing now ... 

[FlashProc] : Ok!

[FlashProc] : CODE 

Current ID : MODEM_W

Current File : sc7731g_CP0_modem.bin

Flashing now ... 

[FlashProc] : Ok!

[FlashProc] : CODE 

Current ID : DSP_W

Current File : DSP_DM_Gx.bin

Flashing now ... 

[FlashProc] : Ok!

[FlashProc] : CODE 

Current ID : MODEM_WCN

Current File : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin

Flashing now ... 

[FlashProc] : Ok!

[FlashProc] : CODE 

Current ID : BOOTLOGO

Current File : logo_480x800.bin

Flashing now ... 

[FlashProc] : Ok!

[FlashProc] : CODE 

Current ID : FASTBOOT_LOGO

Current File : fblogo_480x800.bin

Flashing now ... 

[FlashProc] : Ok!

[FlashProc] : CODE 

Current ID : BOOT

Current File : boot.img

Flashing now ... 

[FlashProc] : Ok!

[FlashProc] : IMAGE

Current ID : SYSTEM

Current File : system.img

Flashing now ... 

[FlashProc] : Ok!

[FlashProc] : IMAGE

Current ID : CACHE

Current File : cache.img

Flashing now ... 

[FlashProc] : Ok!

[FlashProc] : CODE 

Current ID : RECOVERY

Current File : recovery.img

Flashing now ... 

[FlashProc] : Ok!

[FlashProc] : IMAGE

Current ID : USERDATA

Current File : userdata.img

Flashing now ... 

[FlashProc] : Ok!

[FlashProc] : BOOTCODE

Current ID : UBOOTLOADER

Current File : u-boot.bin

Flashing now ... 

[FlashProc] : Ok!

Elapsed: 00:03:48

Reconnect Power/Cable!