Lyf water 7 flashing Solution With CM2 Dongle
Lyf water 7 flashing Solution With CM2 Dongle
Operation : Read Flash [ v1.09 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device not found!
Check cable, connection and drivers!
Reconnect Power/Cable!
Operation : Read Flash [ v1.09 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 024E9571
ID_BLOCK_I : 0090B0E1
ID_BLOCK_L : 768EE412BD2956510E63EDF23D048CBC
ID_BLOCK_L : 0578C6696AF565EEE3D2877C76B9B794
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!
Brand : LYF
ProdName : LS_5504
ProdModel : LS-5504
Device : zx55q05_64
AndroidVer: 5.1.1
Manufact. : LYF
QLMxCPU : MSM8916
QLMxPRJ : LYF_LS5504_1.18_215544
DevInfo : MSM8916__LYF__LYF__ANDR_v5.1.1__LS-5504__zx55q05_64__LS_5504__LYF_LS5504_1.18_215544
Reading Flash Content ...
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : splash.img
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
Android Info saved!
Read finished!
Configuration : MSM8936 / eMMC
Firmware Size : 1767 MiB
Done!
Elapsed: 00:07:02
Reconnect Power/Cable!


0 comments:
Post a Comment