Ultimate Multi Tool QcFire v0.8 Setup Download

Ultimate Multi Tool - QcFire v0.8
The Ultimate Qualcomm Module

Repair almost all Qualcomm Devices supporting Firehose Protocol
Supported Brands
- Alcatel  Cherry Mobile  Coolpad  HTC  Huawei  Lenovo  Lyf  Micromax  OnePlus Oppo
- Swipe Vivo Xiami YU
Supported CPUs for Auto Detection
- 8610  8909  8916  8917  8929  8936  8937  8940  8952  8953  8974
Supported CPUs with Internal Loaders:
- 8610  8909  8916  8917  8929  8936  8937  8940
- 8952  8953  8974  897  899- 899 - 8996  8996  8x10  8x26
Updated Support For MSM8996
- Read Firmware.
- Write Firmware.
- Reset EFS.
- Format FS.
- Read Pattern ( older than 6.x).
- Reset FRP.
- Not like others who support 99% CPU but can not even BOOT this CPU.
Improved Reset EFS Function for LYF Phones
- You can Reset EFS of LYF phones to repair IMEI.
- No need to worry about SPC error on Read QCN.
- After Reset EFS, just Repair Original IMEI using our GSM Module > Qualcomm Universal > UMT Method [2].
Updated Flashing Function
- Now you can flash almost any phone with 512B or 4KB Sector.
- Auto patch file selection updated to use related patchx.xml like patch2.xml for rawprogram2.xml.
- Improved log display to show partition name with file name.
Updated Support For Alcatel Devices
- Now it should support devices with different firehose protocol, eg. OT-6045B
Updated FRP Reset Method
- Now it will support more brands, like Alcatel etc.
- We recommend to make Security Backup first inscase you feel any issue later.
- Incase of any issue, you can flash back security backup you made
Updated Program XML Handling
- Now it will simply skip flashing of missing files, instead of showing any error.
- Previously it was showing "file missing" message and flashing was not started.
- Please note, that some missing files from firmware may cause boot-loop.
Added more data to backup on Security Reading
Optimized Booting Speed
Optimized Disk Size Detection
Possibly Fixed BackupGPT Read Error on some devices
Other Improvements which we forgot to mention
COMMON ERRORS AND FIXES
- Write Err while sending loader.
- It means that selected loader (either manual or auto) is not compatible with hardware. You should try with other loader for same CPU (as mostly all CPU will be detected perfect with QcFire), or use Factory Loader which often comes with Firmware.
- Init Handshake Sequence Failed.
- Common communication problem with phone. Try to connect phone again in download mode and try operation again.
- Reading Pattern Data... Data Missing! Failed
- Read Pattern is supported only on Android older than 6.x. It should work fine with 5.x and lower Android Versions.
- Mi Account Not Active
- It means that Mi Account data was not found. Check if phone asks for Mi Account on startup. Otherwise, Format FS, turn phone ON, then turn OFF and try again.
- Warning! High Speed Driver not installed.
- This will seriously downgrade Reading performance. Please update driver from QcFire\Drivers folder. However, it should not affect flashing procedure.
*** SPECIAL THANKS TO OUR VALUABLE USERS FOR THEIR CONTINUOUS SUPPORT ***
It Has Begun...
Stay Tuned...
More Amazing Updates On The Way...
ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.
WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.
:: NO FAKE ADVERTISEMENT ::
:: NO FAKE UPDATES ::
:: NO FAKE WORLD'S FIRST ::
:: NO FAKE BLA BLA BLA ::
PARTICIPATE IN FREE UMT CONTEST AND WIN
Why Waiting? Buy Today and Feel the Difference
Choose Your Reseller Now and Feel The Real Ultimate Tool
How to Download:
-
 Download UMT Support Access.
-
 Connect UMT Box/Dongle to PC and Run UMT Support Access.
- Download required Executable from Installer folder.
- Enjoy!
- Download Mirror - Google Drive.
SPECIAL MESSAGE TO OUR SPECIAL FRIEND ***MUST READ***
- First of all, thank you for using our software as a standard for you as you love to compare your tool with ours. Everybody knows, we always compare to someone better than us and try hard to be like them. But some people get success, some face failure. Got success or not tried hard yet?
- Thank you to edit our logs before posting with your update, because somewhere you know that you can't beat us without cheating and without making our users fool. Got success or not?
- You claim to support 99% CPU and irony is, that you can not even boot MSM8996. Or possibly you have sniffed our code and learned about it. Learned or not?
- You claim to be the first to support all CPU by factory loaders, or user can select their own loader. It made us laugh very loudly. As our users, and even yours, can see that we support Custom Loader selection option since v0.1.
- Next time, use logical things to impress your users. Users are not as much fool as you think. They make us perfect with their complaint and support. So if you try to fool them, you actually try to fool yourself.

- If you find some grammatical or spelling mistake in my message, don't make it a point for your next update. Our English is not that bad and such mistake is just a typo.
*** END OF MESSAGE ***